Laser engraving machine engraving acrylic technology method
Laser engraving machine engraving acrylic technology method
Acrylic (an organic glass)
Acrylic is one of the most commonly used behind the wood carving material, it is easy to cut and carved, there are a variety of shapes and sizes, costs are relatively low.There are two kinds of organic glass production process: casting and rolling, laser engraving machine is mainly use the way of casting production of organic glass, because it's in laser engraving machine carved after the frost effect is very white, contrast with the original transparent texture, calender way after the production of organic glass in laser engraving machine carving is transparent, no enough contrast.When buying organic glass do you want to agency emphasize a kind of high purity, or buy back engraving or cutting materials may have the phenomenon of the melting,the prospect of laser engraver for sale is very good.
carving
In general, organic glass back engraved with the payment that is carved in the front and rear view, which makes the product more stereo feeling.When the back engraved please graphics to mirror, and carving faster, lower power.Such as sculpture when power is too high, can make the bottom appear uneven stripes, such as to develop deep carved some may try to carve a few times more.Carving on the back case of local color shading should first will be carved to get some deeper, and then use the flame polishing machine polishing, can only be coloring.If without polishing processing, seen from the front color is not uniform.
cutting
Organic glass is relatively easy to cut, such as customer's requirement is not high, after cutting can delivery, without flame polishing again.Otherwise the blowing device should be used when cutting, to improve the quality of incision.When cutting more than 8 mm plexiglass, should change the large size of the lens,the prospect of laser engraving machine for sale is very good.
Note: when using laser engraving machine for cutting organic glass operators do not leave, there may be a flame cutting.
clean
After carving can use wet cloth clean surface
coloring
Can use c thin paint, other pigments could damage organic glass finish.
Laser engraving machine debugging optical path method
Laser engraving machine debugging method of optical path:
Root now, the customer will not adjust the light path of the situation, to help customers better adjust the light path, we put the mirror light path adjustment method of simple introduction is as follows: (upgrade CD image interpretation)
Adjust the steps removed: first determine the plotter and chassis parallel)
(1), push the third reflector (laser) to the second reflection mirror recently, click the test switch, and then push the laser head to the farthest in accordance with the above method and the recent place, whether the observation of two heavy merge to adjust.
(2), remove the laser head at the bottom of the lens, take a double-sided adhesive layer on the lens under the laser hole, press the switch test.Observe whether the laser from the middle.If it is not should undertake the corresponding adjustment, that is, from the first reflection mirror and laser began to adjust, after the adjustment the lens installed.http://www.morngraver.com/laser-engraving-machine.html
(3), six thin double-sided adhesive laminated together, reflect on the first beside the laser export frame, cover the reflectors, attention must be don't let the glue come into contact with the mirror, mirror to avoid pollution.Then click on the test switch.Observation of laser light is playing in the middle of the first reflector, if not then need to adjust the frame of the screw, to hit the laser spot in the center of the lens.