Has your heating system quit working? These leading 5 heater problems and their simple services might help to get it working.
Having problem with your heating system? You're not alone. Luckily, lots of issues have simple Do It Yourself fixes. The first step: Inspect whether your A/C system has power. You do not desire to have a service tech pertained to your home just to flip a switch at the breaker box. If power isn't the issue, examine other possible problems prior to requiring service.
# 1 PROBLEM: Thermostat isn't working.
LIKELY OFFENDER: If your heat isn't beginning at all, try changing the batteries in the thermostat, if it has batteries. While you're at it, give the thermostat a good cleaning inside with a little paintbrush.
You can also try to reboot it. With the thermostat set to Heat, turn the temperature to about 60º. Then, turn the breaker switch off for 30 seconds and turn it back on Still nothing? Contact a specialist.
# 2 PROBLEM: System not turning on.
MOST LIKELY PERPETRATOR: Examine the emergency situation shutoff switch for the heating system. It might be at the entrance to the furnace closet, at the top of the basement stairs, or on the heater. It may have a red switch plate. if somebody changed it off, the heater won't work.
# 3 PROBLEM: Dirty filter
MOST LIKELY PERPETRATOR: Not switching out an old filter can cause a host of problems, not to mention increasing your energy costs. To guarantee your heating system does not work overtime, alter your filter every one to 2 months. Here's how: Turn off your heating system, find the filter, get rid of the old one (and remember of the size), replace it and turn the heating system back on.
# 4 ISSUE: Heater isn't igniting
MOST LIKELY CULPRIT: Does your heater click as though it's about to turn on, but then go quiet and never start? If you've examined the power, checked the thermostat and changed the filter, the pilot burner or the ignition sensing unit is most likely the problem. To fix it, begin by switching off the gas to your heating system. Then eliminate the front panel and discover the igniter or ignition sensing unit, which is generally near the burners. Snap a picture of the sensing unit to remind you of how it's connected and after that eliminate the ignition sensing unit. Rub it with steel wool to remove residue, being cautious to not damage it. Then put it back exactly as you discovered it and replace the panel before turning the gas back on. If you have any doubt about this project, play it safe and employ the pros.
# 5 PROBLEM: Furnace keeps tripping the breaker
LIKELY PERPETRATOR: If your heating system keeps tripping the breaker or blowing the fuse heating and cooling near me when the heat starts, it's most likely an electrical concern. To keep you and your household safe, call in the pros to detect the cause.
While lots of common furnace concerns can be fixed without employing the specialists, it is necessary to have your furnace professionally serviced as soon as a year, specifically if you're not comfy carrying out a few of the necessary upkeep jobs yourself.