Has your heating system quit working? These top 5 heating system issues and their easy options might help to get it working.
Having difficulty with your heater? You're not alone. Thankfully, lots of problems have easy DIY fixes. The initial step: Check whether your A/C system has power. You don't wish to have a service tech concerned your house simply to flip a switch at the breaker box. If power isn't the issue, check other possible problems before requiring service.
# 1 ISSUE: Thermostat isn't working.
MOST LIKELY PERPETRATOR: If your heat isn't beginning at all, attempt altering the batteries in the thermostat, if it has batteries. While you're at it, give the thermostat a great dusting inside with a small paintbrush.
You can also attempt to reboot it. With the thermostat set to Heat, turn the temperature down to about 60º. Then, turn the breaker turn off for 30 seconds and turn it back on Still absolutely nothing? Contact a specialist.
# 2 PROBLEM: System not switching on.
MOST LIKELY CULPRIT: Examine the emergency situation shutoff switch for the furnace. It may be at the entrance to the heater closet, at the top of the basement stairs, or on the furnace. It might have a red switch plate. if someone switched it off, the heater will not work.
# 3 ISSUE: Filthy filter
LIKELY OFFENDER: Not switching out an old filter can cause a host of issues, not to discuss driving up your energy costs. To ensure your heating system does not work overtime, change your filter every one to two months. Here's how: Shut off your furnace, find the filter, remove the old one (and take note of the size), replace it furnace repair in toronto and turn the heater back on.
# 4 PROBLEM: Heater isn't igniting
MOST LIKELY OFFENDER: Does your furnace click as though it will turn on, but then go silent and never ever begin? If you've checked the power, inspected the thermostat and altered the filter, the pilot burner or the ignition sensing unit is likely the issue. To fix it, start by switching off the gas to your heater. Then remove the front panel and discover the igniter or ignition sensing unit, which is generally near the burners. Snap a photo of the sensing unit to advise you of how it's connected and then eliminate the ignition sensing unit. Rub it with steel wool to get rid of residue, bewaring to not damage it. Then put it back exactly as you found it and change the panel prior to turning the gas back on. If you have any hesitation about this project, play it safe and call in the pros.
# 5 ISSUE: Furnace keeps tripping the breaker
LIKELY OFFENDER: If your heater keeps tripping the breaker or blowing the fuse when the heat begins, it's more than likely an electrical problem. To keep you and your household safe, call in the pros to detect the cause.
While numerous typical furnace problems can be repaired without employing the experts, it is necessary to have your heater expertly serviced when a year, especially if you're not comfortable performing a few of the necessary maintenance jobs yourself.