killtest Juniper Networks 資格認定 JN0-130試験問題集 提供

killtestのJuniper Networks認定JNCIS の仮想を導入、維持するための知識、JN0-130テスト 、資格をIT情報を提供します。
JN0-130試験はJNCIS での仮想マシンソフトウェアにおける世界的な最大手企業です。Juniper Networksは分散されたシステムに仮想コンピューティングをもたらします。企業はJuniper Networks ソフトウェアをサーバー連結や作業負荷管理、またはアプリケーションの開発、テストの導入のために使用しています。弊社も一発合格することが保証できます。
さらに、何とかして、このすごさをお伝えさせて頂きたい！！
全額返金キャンペンも実施いたします。
体験したい時に無料でいつでもオンラインでアクセスすることが出来るので、忙しい IT エンジニアの皆さまのトレーニング教材に最適です。

JN0-130

1. If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
2. What type of router cannot exist within a stub area?
A. ABR
B. ASBR
C. internal router
D. non-backbone router
Answer: B
3. Which statement is true about the frequency of OSPF LSA transmissions?
A. They are configured per OSPF area.
B. They are configured per virtual router.
C. They are configured per OSPF process.
D. They are configured per OSPF interface.
Answer: D
4. During OSPF adjacency formation, what state is a router in when it is sending LSA header information
to its neighbor?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: D

5. Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
6. When configuring OSPF on the ERX, what is the default auto-cost reference-bandwidth value?
A. 1 Mbps
B. 10 Mbps
C. 100 Mbps
D. 1000 Mbps
Answer: C
7. What are the three OSPF authentication methods supported on the ERX Edge Router? (Choose three.)
A. null password
B. simple password
C. message digest 5
D. Password Authentication Protocol
E. Challenge Handshake Authentication Protocol
Answer: ABC
8. What is the purpose of the OSPF hello packet?
A. advertises reachable networks
B. acknowledges the receipt of update packets
C. establishes and maintains neighbor relationships
D. describes the contents of the link-state database
Answer: C

JNCIA認定 JN0-140提供 killtestへようこそ

killtestのJNCIA認定 　JN0-140試験問題集
Juniper Networks資格の特徴
ネットワークの実務基盤を問う認定資格。ネットワーク技術業務において実務上共通して必須とされる顧客側の環境の理解と最適な環境へ導くための技術知識、問題解決能力が問われる。日本HPやマイクロソフトの認定資格などITベンダー資格試験と連携している。

JN0-140

1. Which two statements are true about applying Host Checker at the realm level? (Choose two.)
A. If Evaluate is checked then the client must pass policy to get the sign-in page.
B. If Evaluate is checked then the client can fail policy and still get the sign-in page.
C. If Require and Enforce is checked then the client must pass policy to get the sign-in page.
D. If Require and Enforce is checked then the client can fail policy and still get the sign-in page.
Answer: BC

2. Which log contains information about service restarts, system errors, warnings, and requests to check
server connectivity?
A. Events log
B. System log
C. User Access log
D. Admin Access log
Answer: A

3. Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client?
A. You do not need to configure a RADIUS client policy.
B. You must know the exact model number of the Infranet Enforcer.
C. You must specify the NACN password of the device in the RADIUS client policy.
D. You do not need to designate a location group to which the Infranet Enforcer will belong.
Answer: A

4. Which configuration option can be set either in the initial console menu or the Admin UI of the Infranet
Controller?
A. VLAN ID
B. Hostname
C. Domain name
D. Administrative timeout
Answer: C

5. What is the primary purpose of creating a Location Group Policy?
A. to associate more than one realm with an authentication server
B. to logically group network access devices and associate them with specific sign-in policies C. to allow
or prevent users from accessing resources in specific locations on the network
D. to define the URL that users of network access devices can use to access the Infranet Controller
Answer: B

6. What is true about the operation of the Infranet Enforcer?
A. It assigns users a set of roles.
B. It allows access based on auth table entries.
C. It verifies whether an endpoint meets security requirements.
D. It configures the UAC agent to allow or deny access to resources.
Answer: B

7. On a pre-existing OAC, which three options can the Infranet Controller overwrite when the user
accesses the Infranet Controller? (Choose three.)
A. SSID
B. login name
C. MAC address
D. wired adapters
E. encryption method
Answer: ADE

8. What must be updated regularly to detect the newest versions of personal firewalls on endpoints?
A. Infranet Enforcer firmware
B. Infranet Controller rollback software
C. Host Security Assessment Plug-in (HSAP)
D. Endpoint Security Assessment Plug-in (ESAP)
Answer: D

Avaya資格 killtestは全部の試験科目を提供し、132-S-911テスト

Avaya-Certification資格　132-S-911テスト
killtestはAvaya-Certification資格認定 の132-S-911問題集は最近更新しました、FileMaker資格試験の品質がレアルAvaya-Certification資格試験と同じくらい厳しくて、同じくらい同様であることを保証するために公式の 証明Avaya-Certification資格試験について132-S-911問題集 を 研究し続けています。100％気楽に試験を通すように保証できます。

132-S-911

1.Prior to putting the system into service, you test the Local Survivable Processor (LSP) failover
capability on the G700 Media Gateway with an S8300 Server. If you unplug the network
connection to the G700 Media Gateway the G700 Media Gateway does not search for a
secondary CLAN or any other LSP. What should you do to ensure that LSP failover has been
properly configured? (Choose two.)
A. You should refresh the IP address
B. You should check the controller IP address
C. You should check the LSP transition points
D. You should run session mgc to bring up the Show Call Control Status screen
Answer: A,B
2 .Your customer is unable to light message waiting lights at a small branch office using a shared
Intuity voice mail system on a QSIG network running DCS. What is the first command you should
execute?
A. list ip-interfaces
B. list media-gateway
C. display-ip-network-region <x>
D. status station <station number>
Answer: C
3 .DHCP option codes 128 to 254 are reserved for site-specific options. A single number out of this
range is commonly utilized by vendors to configure their Avaya IP phones via DHCP (Option 176).
Which additional option code supports vendor-specific options?
A. 3
B. 23
C. 43
D. 63
Answer: B
4 .What color is the LED when a TN circuit pack is executing a test?
A. Red
B. Green
C. Yellow
D. Amber
Answer: B
5 .You are migrating from a Definity server to an S8500/S87XX server. Where is the IPSI board
located?
A. It is always placed into slot number 1.
B. The location depends on which media server is used.
C. It can be slotted into any available media gateway slot.
D. The location depends on which media gateway is used.
Answer: C

6 .Which Communication Manager (CM) feature utilizes PSTN connectivity when IP WAN bandwidth
limit has been reached?
A. Inter-Gateway Alternate Routing
B. Intra-Gigabit Analytical Resource
C. Intelligent Global Access Routing
D. Intelligent Gatekeeper Associated Routes
7.Which two Avaya Communication Manager commands display the VoIP statistics of a specific
extension active on call? (Choose two.)
A. Status station
B. Display station
C. List trace station
D. Display trace station
Answer: B
8 .Which two statements are true about DHCP? (Choose two.)
A. A DHCP server is required to configure all Avaya IP telephones
B. A DHCP server can be used to send the DNS server address to the client
C. One DHCP server is required for each subnet containing clients that require the service
D. A DHCP server is used to send an IP address, subnet mask, and default gateway address to
the client
Answer: A,C