Has your furnace quit working? These leading 5 heater issues and their simple options may help to get it working.
Having problem with your heating system? You're not alone. Thankfully, lots of problems have simple Do It Yourself repairs. The very first step: Examine whether your A/C system has power. You do not wish to have a service tech pertained to your house simply to flip a switch at the breaker box. If power isn't the issue, check other possible problems prior to calling for service.
# 1 ISSUE: Thermostat isn't working.
LIKELY PERPETRATOR: If your heat isn't coming on at all, try altering the batteries in the thermostat, if it has batteries. While you're at it, give the thermostat a good cleaning inside with a little paintbrush.
You can also try to reboot it. With the thermostat set to Heat, turn the temperature level down to about 60º. Then, turn the breaker turn off for 30 seconds and turn it back on Still absolutely nothing? Call in a professional.
# 2 PROBLEM: Unit not switching on.
LIKELY CULPRIT: Check the emergency shutoff switch for the furnace. It might be at the entrance to the heater closet, at the top of the basement stairs, or on the furnace. It may have a red switch plate. if somebody changed it off, the heating system won't work.
# 3 PROBLEM: Dirty filter
MOST LIKELY OFFENDER: Not swapping out an old filter can trigger a host of issues, not to point out increasing your energy costs. To guarantee your heater doesn't work overtime, change your filter each to 2 months. Here's how: Switch off your furnace, find the filter, eliminate the old one (and keep in mind of the size), replace it and turn the heater back on.
# 4 PROBLEM: Heater isn't firing up
LIKELY OFFENDER: Does your heater click as though it will turn on, however then go silent and never ever start? If you have actually inspected the power, checked the thermostat and changed the filter, the pilot burner or the ignition sensor is most likely the problem. To fix it, begin by shutting off the gas to your furnace. Then remove the front panel and find the igniter or ignition sensor, which is generally near the burners. Snap a picture of the sensor to remind you of how it's connected and after that eliminate the ignition sensing unit. Rub it with steel wool to eliminate residue, taking care to not damage it. Then put it back precisely as you found it and replace the panel prior to turning the gas back on. If you have any doubt about furnace installation toronto this job, play it safe and contact the pros.
# 5 PROBLEM: Heating system keeps tripping the breaker
MOST LIKELY PERPETRATOR: If your heater keeps tripping the breaker or blowing the fuse when the heat kicks in, it's more than likely an electrical problem. To keep you and your family safe, hire the pros to identify the cause.
While numerous typical furnace concerns can be repaired without calling in the experts, it is necessary to have your heating system professionally serviced as soon as a year, especially if you're not comfy carrying out some of the needed upkeep tasks yourself.