Has your heater stopped working? These top 5 heating system issues and their easy options may help to get it working.
Having difficulty with your furnace? You're not alone. Fortunately, lots of problems have easy DIY repairs. The first step: Inspect whether your A/C system has power. You do not want to have a service tech pertained to your furnace repair toronto home simply to turn a switch at the breaker box. If power isn't the problem, inspect other possible glitches prior to calling for service.
# 1 ISSUE: Thermostat isn't working.
LIKELY OFFENDER: If your heat isn't beginning at all, try changing the batteries in the thermostat, if it has batteries. While you're at it, offer the thermostat a good cleaning inside with a little paintbrush.
You can also try to reboot it. With the thermostat set to Heat, turn the temperature level to about 60º. Then, turn the breaker switch off for 30 seconds and turn it back on Still nothing? Hire a professional.
# 2 PROBLEM: System not switching on.
LIKELY PERPETRATOR: Inspect the emergency shutoff switch for the heating system. It might be at the entryway to the heating system closet, at the top of the basement stairs, or on the furnace. It may have a red switch plate. if somebody changed it off, the heater will not work.
# 3 ISSUE: Unclean filter
MOST LIKELY CULPRIT: Not switching out an old filter can cause a host of problems, not to mention increasing your energy bill. To guarantee your furnace does not work overtime, alter your filter every one to two months. Here's how: Turn off your furnace, discover the filter, remove the old one (and bear in mind of the size), change it and turn the heater back on.
# 4 PROBLEM: Heating system isn't igniting
LIKELY PERPETRATOR: Does your heating system click as though it will turn on, however then go quiet and never ever begin? If you've inspected the power, examined the thermostat and changed the filter, the pilot light or the ignition sensing unit is most likely the issue. To fix it, start by turning off the gas to your heating system. Then remove the front panel and find the igniter or ignition sensor, which is generally near the burners. Snap an image of the sensing unit to advise you of how it's connected and then remove the ignition sensor. Rub it with steel wool to eliminate residue, being mindful to not harm it. Then put it back precisely as you found it and change the panel before turning the gas back on. If you have any hesitation about this task, play it safe and employ the pros.
# 5 ISSUE: Heating system keeps tripping the breaker
MOST LIKELY PERPETRATOR: If your heating system keeps tripping the breaker or blowing the fuse when the heat begins, it's more than likely an electrical problem. To keep you and your family safe, call in the pros to diagnose the cause.
While lots of typical heating system problems can be repaired without contacting the specialists, it's important to have your heating system professionally serviced once a year, specifically if you're not comfortable performing a few of the necessary upkeep tasks yourself.