Wholesale Brake Shoes even before the playground
Before you jump into purchasing a new backyard playground for your family, consider the following Backyard playground safety begins Wholesale Brake Shoes even before the playground equipment has been constructed and installed. This article, and the series of articles that follow, will assist you in planning for and creating a safe backyard playground experience for your children and their friends. The Best Location for Your Backyard Playground Equipment Choosing the ideal location for your new playground equipment is the first step in ensuring backyard playground safety. Avoid sloping areas level ground helps prevent playground equipment from tipping over. In addition, select an area that is away from potentially hazardous obstacles such as trees, low branches and wires, stumps, roots, large rocks, fences, bricks, and concrete. Plan for a safety zone of at least 6 feet around all backyard playground equipment; set aside even more space in front of and behind swings.Think ahead, also, to where you plan to position any metal or dark-colored slides or surfaces. Placing these out of direct sunlight can help prevent burns on hot, sunny days. Protective Playground Surfaces Once you have chosen the safest location for your backyard playground, the next step is to select an appropriate type of protective surface for under and around the equipment. Grass and dirt are the most common surfaces found under backyard playgrounds, but they are not adequate protection against injuries due to falls. Pea gravel, sand, wood chips, and shredded or recycled rubber mulch are some examples of protective playground surface options. Each protective surface option has its own specific minimum depth recommendations. More details on the topic of protective playground surfaces is covered in the next article in this series. Backyard Playground Construction Materials Two of the most common materials used to construct playground equipment are metal and wood. Metal playground equipment should be galvanized, painted using a lead-free paint, or otherwise treated to prevent rusting. Wooden playground equipment should be treated to resist rotting and insects. Cedar and Redwood are two recommended wood types for wooden playground construction because they are naturally resistant to rotting and insect damage.ACQ pressure treated wood is also a good choice. Any wood chosen, though, should be intended for outdoor use. To increase backyard playground safety, splinters and sharp edges on wood and metal equipment should be removed or covered. Safe Hardware for Playground Equipment Use the bolts and screws recommended by the manufacturer of your playground equipment. Lock washers or self-locking nuts are essential to prevent bolts from loosening over time. Be sure to cap any exposed bolts these can cause serious cuts or entangle loose clothing. In addition, close all S hooks so that openings are less than the thickness of a dime. Carabiners, like those used in mountain climbing and other adventure sports, can be used as an alternative to S hooks to attach the top of each swing to the swing beam hardware.
