Now check the rotational direction of the new tire, and align it with the rotational direction of the rim. When doing this, keep the tires rotating. Use the yellow line as a guide.Changing tubeless tires is not an uphill task, it might take a little of your energy and time before they perfectly fit in. Next, use weights to check the high spots of your wheel while spinning. Lubricate the tire walls using a wheel mounting lubricant or spray-on silicone lubricant.Place the motorcycle wheels on two blocks of wood or tire changing stands. When you are done, spin the tires one more to loosen the grease on the bearings. This will make easier for the bead to sit in place. In this case use milk crates.
Place the wheels together with their axle and suspend them across the four crates.Here are the few you need before you get started:After gathering the above materials, follow the steps mention below to safely install your Michelin Motorcycle Tires. You can then go ahead and fit the core tools on the valve stem’s core. Then insert the rest of the bead using a Breezer tire tool.
The next step is to check and mark the rotation of the rim.Next, place the valve stems in line with the valve holes; place them in such a manner that the valve stems are protruding through the valve holes. Use a pencil marker to mark the direction.
Well done. Michelin advises all motorcyclists to take their tires to an installer to have it mounted safely; however, you can possibly do it at home by following the 5 steps illustrated in this article. This will guide you when adjusting the new tire’s rotational direction to match that of the rim. Press the lower bead into the tire rim without using any irons.
Our next concern is tire balancing. Check for any cracks or faults and repair them immediately. Keep adding the weight and mark the high spots until the markings become random. Continue pumping air until the bead fits properly on the rim or until hear a loud pop. Lubrication improves the tire performance and safety while riding. Remember that motorcycle tires have a recommended PSI that must be observed at all times.
After you are done with the four steps, go ahead and inflate your new tires. Using tire irons, carefully roll the bead to the rim edge until it is completely over the rim. Then spin the tires. There are a number of methods of balancing your wheels at home without using a balance machine. Make sure you do not under or over inflate the tires. Enjoy a safer ride with Michelin Motorcycle Tires.Good, now the tires are mounted.Attempting to mount your motorcycles tires may be dangerous. Your wheel is now mounted and balanced. When all this is in place, use an air compressor to pump some air into the tube.