Nd:YAG processing principle and characteristic

Nd:YAG processing principle and characteristics The principle of ultrasonic rotary machining uses hot-pressed or electroplated diamond tools, usually using water as the coolant. During processing, a certain static pressure F (about 1.0 to 3. OMPa) is applied to the processing tool and the workpiece. In addition to high-speed rotation (2000-5000 rpm), the tool also has a small amplitude of ultrasonic frequency (10--20 um). Vibration. The material is broken by the combination of scraping and hammering of the diamond material on the machined material. The material of the processing area is gradually broken and crushed immediately. customized plano/spherical/aspherical/cylindrical BaF2 opticsstrong> The T3030 3/ZV type super-rotating machine for forming the outer circumference of the NdtYAG crystal rod was experimentally studied. The machine is mainly composed of machine body, ultrasonic vibration system, ultrasonic electricity source and electrical control part. UV and IR grade BaF2 opticsNd:YAG processing principle and characteristics The principle of ultrasonic rotary machining uses hot-pressed or electroplated diamond tools, usually using water as the coolant. During processing, a certain static pressure F (about 1.0 to 3. OMPa) is applied to the processing tool and the workpiece. In addition to high-speed rotation (2000-5000 rpm), the tool also has a small amplitude of ultrasonic frequency (10--20 um). Vibration. The material is broken by the combination of scraping and hammering of the diamond material on the machined material. The material of the processing area is gradually broken and crushed immediately. customized plano/spherical/aspherical/cylindrical BaF2 opticsstrong> The T3030 3/ZV type super-rotating machine for forming the outer circumference of the NdtYAG crystal rod was experimentally studied. The machine is mainly composed of machine body, ultrasonic vibration system, ultrasonic electricity source and electrical control part. UV and IR grade BaF2 opticsstrong> Its main feature is that the ultrasonic vibration system is set up in the tenth and the tuning work uses the invention of one of the authors. The working feed control adopts a hydraulic constant force servo system, the rotating head speed is controlled by a thyristor, and the diamond bit is made by a hot pressing sintering method. a>