Recently, U.S. researchers are jointly developing a tiered solar thermal hybrid solar Dell vostro 1500 battery , combine the solar photovoltaic cells and the thermoelectric materials to absorb light and heat , two different forms of solar energy. Meanwhile, the U.S. Department of Energy is also hoped that the solar cells are made into wooden tiles, in order to contribute to the environment. To achieve this goal, the Department of Energy to the United Engineering Corporation allocated 150 thousand U.S. dollars of funds to help it for the first phase of research and development.

The company is currently working with Columbia University in New York. The researchers hope that the roof solar Sharp md-mt831 battery panels solar thermal hybrid solar conversion efficiency can reach 12%, although the efficiency is not high, but considering the low cost, is still attractive. At present, models produced: In the solar panels under the outermost layer of protection is a photovoltaic solar cells for Casio np-100 , followed by the researchers referred to as "functional upgrades sandwich", and from the plastic tube composed of thermoelectric materials. Plastic Header Pipe into the cold water cooling panels to play the role of outflows into the hot water heating for people to use. In the plastic tube below the bottom of the battery plate: plastic strengthened stories. Photovoltaic solar cells to solar electromagnetic radiation into electricity, while the thermal layer of solar thermal energy will be converted into electricity. Researchers presented, plastic pipe "feature upgrades sandwich" in the whole hybrid solar panels plays an important role, especially in the summer, the solar Dell inspiron 710m battery temperature is too high, the conversion efficiency becomes low, this time plastic pipe cooling device The role will be very obvious.

Right now, other than the battery for Dell inspiron 710m battery were tested on the laboratory of Columbia University , they will be tested in New York, Douglas College (FDA) a roof area of 6.4 square meters of construction . The researchers also calculated the cost of the technology to generate electricity, which is determined that a new energy technology can compete with fossil fuels, the most basic standards.

This are the first stage of the experiment. If the success of this phase, researchers will be 6 months into the second stage: one million U.S. dollars from the Department of Energy to obtain funds in a year the technology was further improved. After the third phase is likely to cost 10 million U.S. dollars for the solar battery , inspiron 7500 battery technology, commercial production. Some studies presented, and they wanted to end within five years, the technology will go into market.

U.S. Department of Energy said they were very supportive of the plan. Solar cell for Dell inspiron 7500 series battery has not been able to penetrate into the market, mainly due to the initial high cost, conversion efficiency is low, but the solar thermal hybrid rooftop solar panels are part of the building's surface, and the efficiency has been improved. At the same time, these low-cost, durable akku panels is extremely suitable for installation in ordinary residential and commercial buildings, the wide range of uses and broad prospects.

 

  1. Nickel-cadmium batteries (Ni-Cd)
  2. It is used in laptop batteries for Dell inspiron 510m battery in the veteran, but because it has a serious memory effect as well as the anode material used in nickel (Ni) on the environment will be toxic and cause pollution, so it is quickly was despise laptop, and replaced by a more superior nickel-metal hydride batteries.

  3. Nickel-metal hydride batteries (Ni-MH)
  4. the structural principle of nickel-metal hydride Dell inspiron 6000 battery is same with nickel-cadmium batteries , but it replaced the cathode by performance better, more environmentally friendly non-toxic nickel - metal hydride materials. Although only a small change, but it has brought a dramatic increase in performance. It also has an unmatched to make the advantages of nickel-cadmium battery is memory effect was not obvious, so that so that we no longer have the memory effect for that nasty trouble and become more user-friendly. Although the performance of nickel-metal hydride batteries for Dell inspiron 600m battery are very good, but with technological advances, it is lighter in weight and a higher energy density lithium batteries replaced, become the laptop battery in the history of deadwood.

  5. Li-ion battery
  6. Many people think that lithium Dell inspiron 630m battery battery means that we are now commonly used in lithium-polymer battery, in fact, lithium batteries, including lithium metal-ion battery (Li-MO2) and lithium-polymer battery (Li-ion) are two. Because Li-MO2 cells to enter the market in 1989, caught fire when the explosion occurred while the die, so it will soon disappear from people's sight, replaced by a safer lithium-polymer battery. It is light weight, in the same capacity under its nickel-metal hydride battery for Dell inspiron 6400 battery weighs only about 1 / 2, so it is fast becoming the new darling of mobile portable devices have been used in most notebook computers, is now the backbone of notebook batteries.

  7. Fuel Cell (Fuel Cell)
  8. Fuel cells are the future of Dell inspiron 640m battery star, it has many types, including proton exchange membrane fuel cell (PEM), alkaline fuel cell (AFC) and solid oxide fuel cell (SOFC) and many other However, due to the fuel cell start-up time and operating temperature and other reasons in fact suitable for notebook computer use only the fuel cell proton exchange membrane fuel cell (PEM). PEM fuel cells for Dell inspiron 700m battery using methanol fuel, from the positive and negative electrodes composed of the principle of its power generation is the result of the methanol, after re-enter the negative hydrogen and oxygen enter the cathode, through the catalyst, hydrogen atoms into protons and electrons, by different paths into the cathode, e-cycle to produce electricity through an internal, proton through the electrolyte to achieve positive, combined with oxygen to produce water and electrical and heat.

    The experts agreed that restricting the commercial application of fuel cells, the biggest factor is the fuel Dell inspiron 700m battery cell to use the metal platinum (Pt) or platinum as catalyst to make the cost of production has been high, the current production cost of the fuel cell 500 ~ 1000 USD / kW. Research shows that only when the fuel cell production costs fell to 50 U.S.dollars / kilowatt level can be truly accepted by consumers. The high cost of fuel cells is mainly due to mass production has not been formed, once entered mass production stage, the price of fuel akku will certainly be greatly reduced.

Many people have this question: the current use of computers at home, the Nikon en-el3 battery was removed from computer not to use for long time, so does it have impact on battery life? what are the notes when using laptop battery?

Foshan GOME stores Experts: laptop battery is a consumable,such as Nikon en-el8 ,the degree of damage depends on the correctness of operation, the operation mode, operating frequency, the working environment temperature, storage time (for unused batteries) and other factors ,when you use the battery .

  1. The battery charging and discharging frequency is directly related to Fujifilm np-120 battery life. Therefore, you currently live establishments have 220V AC power, they should make full use of AC power to minimize the number of battery charging to extend battery life. At this point the battery do not have to remove from the machine because it will not start more than 96% of the electricity to recharge the battery.
  2. But even so, if you are a long-term use AC power and rarely used the Jvc bn-vf808 battery, it is recommended, or remove the battery from the machine to compare the good, because the long-running laptop heat generated when the battery will cause some damage.

  3. When the electricity is 3% ~ 5%, it is timely to charge the battery, Casio np-100 ,or battery self-discharge phenomenon will cause over-discharge and damage to the battery, charging the machine and may be shut down, suspend any other state, you can also charge while edge use. Charging must be a full, otherwise it will damage the battery.
  4. If the prolonged use of alternating current to the Jvc bn-vf823 battery removed, the best charge and discharge once a month.
  5. Do not place the battery on the pocket, purse or other container, so as not to cause the battery to short circuit. The resulting strong currents would lead to very high temperatures, there may be a result of the machine is damaged due to burning.
  6. Do not use a damp cloth on the metal parts of the akku , do not touch the battery with wet hands.
  7. Do not the sun, heat objects next to or near the place where the fire source, using the Jvc bn-vf808 battery or to their charge.
To know more,please click: pib journalspace blogsarena christiansunite ohlog tabulas