The dedication of avoidance methods and causes for temperature showing deterioration would be to determine inner trigger and the exterior cause.
They're:
1. The steel floor finishes (air concentration cell deterioration).
2. Chemical structure and framework of the steel substance itself.
3. PH and structure value of the clear answer which connections using the steel area.
4. The surroundings moisture and heat.
5. Numerous environmental press which connections with steel materials.
6. Its pH price, the work is 5 6. To be able to avoid the hand work, manufacturing and installment employees must use gloves to avoid immediately calling manually with temperature showing.
Rust proof gas to avoid rust of temperature showing
1. Relax technique: Little showing soaked to create a coating of anti-decay gas on its area; gas film width could be managed viscosity or from the oil heat.
2. Comb technique: Consistently brush about the bearing area.
3. The spray method: Some decay that is large is unsuitable by treating method. It's required to make use of Mpa for spraying in climate compressed filter air. Spray technique can be used with filter rust-proof layer or oil of anti-rust gas. This process should be used with work safety and ideal fire-prevention.
Once the Pillow Block Bearings move underneath the load-bearing, outer-ring raceway area or moving good present and internal created draining because of moving fatigue sensation.
Of showing burning injury causes :
1. The strain is not too small.
2. Installment is poor (non-linear), torque weight, international invasion, water invasion.
3. Bad lubrication, improper showing approval, improper lubricants.
4. Showing box's accuracy is poor, the angel of showing container and also unequal stiffness of base deflection are not too small.
5. Decay, damage and indentation, erosion (area deformation trend).
The showing draining harm to be solved by steps :
1. Examine the bearing's packing and examine it.
2. Enhance the installation techniques; enhance the closing system, anti-decay when end.
3. Make use of the lubricant that is suitable improve the lubrication technique.
4. Examine the accuracy of the bearing property and also the base.
5. Examine the settlement.