Bloodpython Japan

Bloodpython Japan

アルビノブラッドパイソンとバンカレッドブラッドパイソン等の飼育日記
Breeding Diary of Albino Blood Python and Banca Red Blood Python

Bloodpythons


Amebaでブログを始めよう!

 

Dantotsu heater Made in Japan
 

It is a far-infrared heater which is attached to the cage's lid (top board) and warms a wide range from the top. Ideal for snakes and lizards that are wound around lights and are afraid of burning.
Besides, because the turtle has lungs directly under the shell, heating from above is effective. 

● Since it can be sprayed, it is also ideal for creatures that require moisture.
● Cage size used: Width (23.6 inch - 35.4 inch) Height (15.7 inch - 23.6 inch)

※ Can not be used underwater.
● Product dimensions: 8.27 x 9.84 x 15.7 inch DANTOTU L-Size
● Weight 660 g

● Equivalent performance can be obtained with about 1/3 power consumption of the heat retaining ball.

Mounting method: Install the screw and washer in the hole of the main body. Please process yourself like a screw hole in the cage's top cover (top plate).

It is a wide heater to be used attached to the upper part inside the cage. It is a wide heater that spreads strongly downward (it is not the type to lay on the bottom)
Recommended for cold areas and babies, elderly animals, poor physical condition. When used in conjunction with a heat retention heater that warms from below, more heat retention will improve.
It can also be recommended for animals that will be broken by being a heater placed at the bottom. Please check whether it meets the shape of the cage.
Increase radiant effect by special insulation material and technical devises, radiate more than about 90% of the heat downward.
Since we do not use a heat retaining ball, there is no worry about breaking bulbs, DANTOTU is excellent in durability and economy.
Since the heater instrument itself will not become hot, it is safe to touch animals. Warm the interior of the cage by the effect of far infrared rays.
Warmth retainability varies depending on the height and structure of the cage, but if it becomes too hot, you can adjust by using a thermostat in combination.

Equivalent performance can be obtained with power consumption of about 1/3 of the heat retaining sphere.
Warm room temperature can be obtained by using in combination with bottom heater.
It is a heater with good compatibility with acrylic breeding cage.


[Examination example of temperature]
In the case of 23.6 inch aquarium (width 23.6, depth 11.7 height 14.1 inch)

"DANTOTU" surface 99.0 °C
"DANTOTU" under 3.93 inch 29.9 °C
"DANTOTU" under 7.87 inch 24.5 °C
"DANTOTU" under 11.8 inch 24.0 °C
Top right in the tank 23.7 ℃
(It is very safe because it does not feel high temperature even if you touch it due to the effect of the nonwoven fabric on the surface)

* Temperature is the value after 60 minutes of energization at ambient temperature of 20.0 ℃.
Data differs between aquarium cage and regular cage.

Heaters for reptiles "DANTOTU"
Electricity bill for each month is about 1/3 of the heat keeping ball due to initial investment!
The reptiles are also delighted with outstanding cost performance as well as ruggedness and running cost!

 

■ Benefits of DANTOTU (DANTOTU / M size case)
1. Electricity bill
As one of the big advantages of DANTOTU, it can be pointed out that the same heat retention power is enough for electricity bills to be 1/3 of the 100 W heat retaining ball.

In the case of 1 kW (0.13 m), the electricity cost when using a 100 W heat-retaining ball for 24 hours 1 month is (9.36 £), whereas in DANTOTU (M size) it is (3.26 £)!
Monthly (6.11 £) will be cheaper as well. Continuing this for 1 year (73.27 £) also deals

(^ o ^)

Asahi Electronics Thermostat
Body size (width X depth X height): 8.5 × 5.6 × 3.8 cm
Body weight: 240 g
Voltage 100 V

 

2. Running cost
Furthermore, since DANTOTU has no light bulb, there is no need to replace the light bulb. Since it is said that the life of the heat-retaining ball is 3 to 4 months, it is necessary to change it 2 to 3 times a year (in the case of not using it in the summer).
Doing so will cost you a running cost of 19.27 £ (28.91 £) per year. (Let one light bulb (9.64 £))
Including that difference will be annual (89.48 £) ~ (103.25 £) difference!

Looking at the blogs of people using DANTOTU, it is overwhelmingly overwhelming that "I use it for over 8 years" or "I remember so for about 10 years" that it was broken in about a year No voice was seen.
If you buy it once, if you keep in keeping with the precautions on use it will not break for several years, it is a strong and affordable insulation tool.


3. Water resistance
When misting on a reptile cage, a light bulb may be cracked accidentally when it comes to a heat retaining bulb or a basking light, but DANTOTU has no worries of being broken because it uses water repellent.

However, because it is not completely waterproof, you should not use it underwater or water it unnecessarily. Also, please keep in mind that bringing moisture near the outlet plug and its vicinity may cause fire or electric shock.


4. Compare the thermal insulation ball and DANTOTU, although the same warmth (same W number), the electricity bill is different so much.
A comparison of electricity charges for each one month when calculated as 1 KW = (0.13 £) is listed.

・ One month's electricity bill when using the thermal insulation ball (100 W)for 24 hours
   0.100×24 hours × 30 days 1 KW (0.13 £) = (9.36 £)

・ One month electricity cost when using DANTOTU / M size (32 W) for 24 hours
   0.100×24 hours × 30 days 1 KW (0.13 £) = (3.26 £)

For use, a transformer that can use electric appliances made in Japan is required. 
Japan's voltage is 100V. Overseas voltage ranges from 110V to 240V.
In such overseas high voltage environments, 
if a Japanese-made electric product is connected, a strong voltage may burden the equipment and cause malfunction ....
It is very dangerous in some cases due to fear of ignition.

When using electric products in overseas high voltage environments, "Transformer (transformer)" is needed to match the voltage of that country to the equipment that uses it.
Down transformer> 200V ~ 240V compatible transformer> 200V ~ 240V correspondence Large transformer is necessary.

<important/Note.>
■ Please be sure to use within 510W.
■ When using motors / electric appliances such as electric heaters that generate heat through a transformer, please choose a transformer with sufficient capacity.
 (Approximately twice the power consumption of electric appliances is a standard)
■ When using continuously for more than 30 minutes, please use with a capacity of 80% or less.
 (Since the power consumption varies depending on * electrical appliances, please check in advance)

 

 


ヘビランキング

ご無沙汰しております♬

 

とうとう冬に差し掛かりましたね。

これからがヘビの飼育にはシビアになりますよね。

 

私はまだまだ飼育歴は3年ほどですからアドバイスなどは出来ないですが、色んな先輩方からご指導を受けて本当に感謝ですグラサン

 

まだまだヘビの本数は少ないですが、以下の写真の飼育部屋を制作致しました。

エアコンは新品ですので消費電力も軽減出来ますので安心です。

 

最近はブラッドパイソンには衣装ケースが本当に適していると思っています。

なぜならかなりの空間の気密性がキープされて湿度が高い状態で管理出来るからです。

既存のケージも勿論良いのですが、一部屋全体をエアコン管理出来るのなら衣装ケースで充分ですねビックリマーク

 

※衣装ケースの底面には断熱材を敷いています。板張りの部屋なので床は冷えますので断熱材(スタイロフォームや発泡スチロール等)をかませばエアコンも温度上昇しなくても良いので消費電力も削減出来ると思います。またサッシの枠、窓の部分にもプチプチ等の緩衝材を貼り付ける事で外気から熱は逃げないと思います。

スチーム式加湿器はオークションなどで500円位で中古品がありますのであれば尚更良いですね♬

 

 

 

 

 

AmazonでNiceな体重測定機を発見いたしました音譜

これまで体重測定はいい加減でしたが、繁殖に向けてしっかりと体重を計り個体の状態を把握するのは大切ですね。

 

 

 

Youtubeにもアップロードいたしました爆笑

 

 

 

交流お勧めサイト

Facebook

爬虫類パラダイス 〔ヘビ類〕

https://www.facebook.com/groups/HachuParaSnake/

何と言っても情報が大事ですね!一人で悩まず先輩さんに悩みはどんどん聞いて行きましょう

:*:・( ̄∀ ̄)・:*:​

 

 

 

Have a nice day!!

 

 

 

 

にほんブログ村 その他ペットブログ ヘビ(スネーク)へ
にほんブログ村

ようやく夏が終わり秋になりましたね♬

 

私は夏がとても苦手ですが、ヘビたちに取っては良い季節だったと事と思いますグラサン

 

これからは冬に差し掛かりますので温度調整がシビアになりますね。

私は色々ヒーター等は試してみましたが、一番ベストなのは新品の省エネエアコンを導入する事が電気代の大幅な削減になるのでお勧めします。

 

部屋中を28℃~30℃にすればケージは格安の衣装ケースで済みますねビックリマーク

 

ブラッドパイソンのレイアウト例

アオダイショウのレイアウト例

{FFF221F8-DD99-4751-B527-D6C88996CCBB}

ネロ君の最近の定位置です(笑)
 

 

スポット用には上の写真のランプドームを使っております。何かと便利です。

 

ゆびきり(交尾)はするのでしょうか?

 

ブラッドパイソンは湿度と温度がしっかりマッチすれば、また餌ぐいが良ければ皮膚の色彩の発色はかなり急変して変化しますビックリマーク

出来ればその個体の生まれ故郷の亜熱帯の気候に近づける事が出来たら良いですね音譜

 

学 名:Python brongersmai別 名:ブラッドパイソン、アカニシキヘビ、マレーアカニシキヘビ、ヒイロニシキヘビ英 名:Malaysian Blood Python分 布:タイからマレー半島を経てスマトラ島周辺まで全 長:1.5-2m 最大275cm

ツチノコを思わせる、その太短い体型が魅力のニシキヘビです。一般にはブラッドパイソンPython curtus としてその中を以下の3亜種に分けていましたが、現在ではそれぞれを独立した種に分けることの方が多いようです。

  • スマトラアカニシキヘビPython curutus curutus
  • ボルネオアカニシキヘビP. c. breitensteini
  • マラヤンアカニシキヘビP. c. brongersmai

上の写真ではわかりにくいかもしれませんが、非常に太短い体型で、尾も短いという特異な体型をしています。特に太さはパイソンの仲間の中でもっとも太くなり、成人男性の鍛え抜かれた太腿のような太さになります。

和名や英名からもわかるように赤褐色の体色に複雑な斑紋が入りますが、体色や斑紋のパターンには変異が多いようです。特にスマトラ島の南部に位置するバンカ島産の個体群は赤色が強く「レッドブラッド」とも呼ばれることがあります。

森林などに生息していますが、特に多湿傾向が強いヘビで、生息地では池や沼あるいは水田などに生息し小型の哺乳類を補食しています。またスマトラ島の東部ではアブラヤシの農場に多く見られ、枯葉などの下でよく発見されるそうです。

生後、3年ほどで成熟し、1-3月に交尾を行い3ヶ月後くらいに産卵が行われます。メスは8cmほどの卵を1クラッチあたり20-30個程度を産み、産卵後は抱卵を行います。この時にメスは体を痙攣させ、その体温で卵を保温することが知られています。卵は約60-70日で孵化し40cm程度の幼蛇が生まれます。

以前からWCの亜成体以上の大きさの個体が、比較的多く輸入されていましたが、性格が荒く、餌付きにくいという傾向が強かったため、日本ではメジャーにはなりきれていないヘビでした。最近ではCB個体や、ファームハッチ個体の幼蛇が流通するようになり、比較的飼育もしやすくなったようです。ただし高温多湿環境を好むことと太さがあるので、体長の割には大きめの飼育容器が必要なことを考えると、初級者向けのパイソンであるとは良いにくいようです。

非常にカッコイイとは思うんですが、私の不得意分野の多湿系...

CITES(ワシントン条約)の付属書II類掲載種

飼育の基本情報飼育容器サイズに合わせてプラケース・衣装ケース・爬虫類専用ケースなどを使う。高さは必要ないが、体が大きいので最終的には90-120cmクラスの大きさが必要温度昼はホットスポットを30℃くらいにし、その他の場所は最低27℃程度に。夜間は21~24℃程度に保温する。照明ホットスポットのみ床材特に幼蛇の頃やWC飼育開始当初はやや多湿を好むので水苔などを敷くと良いが、成長したら、ある程度の適応力はあるのでなんでもよい容器内レイアウト全身が浸かる程度の大きさの水容器を設置餌大きさに合わせたマウス・ラット。冷凍を解凍したものでよい基本的な世話

  • 幼体時はやや高温多湿にするが蒸れないように通気性を確保する
  • 水は毎日交換する
  • など

※「飼育の基本情報」は海外サイトおよび「大蛇世界(マリン企画)」を参考にしました。

 

{E5E457BA-F55C-4C28-A592-BFE8B678277A}
 
現状はラットを与えておりますが、5kgを超え出したら思い切ってウサギに変更した方が良いかもしれないですガーンウサギの方がコストはかからず栄養価も高いですしかし終生ラットでも大丈夫とはショップの方からお聞きしました。
 
ここは各オーナーさんの考え方しだいですねグラサン
 
{14119B84-0B90-4788-960F-C884F32A5569}


ブラッドパイソンの飼育及び繁殖に関しましては海外のサイトがGoogleの一発翻訳でだいたい理解して読めますので参考にどうぞ。

 

Blood Python Care & Breeding

http://www.acreptiles.com/main/index.php?option=com_content&amp;amp;view=article&amp;amp;id=137&amp;amp;Itemid=298

 

Blood Python Care Guide

 
 

See you next time音譜

 

 

マラヤンブラッドパイソンが我が家にやってきましたビックリマーク

 

{11866BDD-5293-4195-998D-06338F330174}


地味な感じですが、なかなか渋いです。

 

 

またもや性質は温和な個体で私に性質の荒い個体は出会ったことが無いです。

 

 

本当にあたりが良いのでしょうか?不思議です。

 

ネロ君も興味しんしんです(笑)

 

 

色合いは地味ですけど、柄が気に入りました
 
衣装ケースはホームセンターで1500円で買いました♬
 
 
 
 
 
♀なので早速、繁殖にトライしてみます
 
{E2719061-9488-4E3A-8CED-DA678B71696E}

遺伝子の事はさっぱりわからないですガーン
 
兎に角まずは実践から入ります。単純に色合いがミックスするのかな⁉️
 
初めての交配なのでワクワクしますね
 
優生の法則
 
メンデルの法則
 
{6A8CFEE4-D07B-4303-8791-8C8C303D2BF6}

♀は4kg ♂は2kgで繁殖は大丈夫と聞きました。
 
ブラッドパイソンの繁殖情報は本当に無いので、海外のサイトを翻訳して勉強中です
 
後は先輩方にご指導いただくしかありません
 
早速、交配するかどうかトライですビックリマーク
 
今日の捕食シーンですゲラゲラ
 
 
short video blood python 捕食
 
{B332A31C-7306-4842-8BA9-7A4A6A6D6F8B}
 
Have a nice dayゲラゲラ

 

 

 

 

 

仕事が忙殺的に忙しかったので全然、ブログの更新が出来なかったですガーン

※言い訳がましいですね~

 

実は数か月前に子猫が道路で車にひかれて顔から血が出ていたので、びっくりして、救出しました。もうかわいそうでかわいそうでまだ息があったので大急ぎで動物病院に連れて行きました。先生からは今夜が峠ですね。と宣告され、私は猫を飼うつもりも無いので病院で引き取って欲しいと祈願しました。

 

しかし、病院側はそれは出来ないので困っておりますとの見解で、仕方なくリュックサックに子猫を入れて家に持ち込みました。

 

家には爬虫類用の器具やケージはあったので子猫をガラスケージに入れてプレートヒータと温熱球で30℃にして暖めてあげました。

 

 

一晩寝ずに看病してとにかく生きるよう祈るばかりでしたビックリマーク

 

翌朝、少し動き出したのでなんとか命は助かる見込みはあるなぁと思い、さっそく子猫用の流動食を買いに行き、シリンジポンプで与えたところなんと、食べ始めましたニコニコ

 

 

それからは徐々に元気になって現在、もうめちゃくちゃなついておりますドキドキ

 

猫のエサ代って高いのかなぁと思ってましたが以外や以外、とてもリーズナブルですビックリマーク

 

カリカリの餌しか与えておりませんが、現在のキャットフードはクオリティーが高くとても栄養価がありますので、猫飼育の先輩から色々教えていただき、現在に至りますラブ

 

 

 

名前はイタリア語で黒のことをNEROと言いますのでネロ君(♂)と命名しましたドンッ

 

 

 

現在、もう2ヶ月になり体重も2kgになりました。この子と出会って私は躁鬱病でしたが、アニマルセラピーの効果も絶大で精神薬の減量にも成功して、なんと鬱病も寛解しております!!

 

まさに運命の出会いです!? 私のことを治療してくれて本当に助かりましたグッド!

 

神様はネロ君と出会う運命を作ってくださったのかなと感じております恋の矢

 

 

いとしのネロ君 よろしくお願いいたします爆弾